Omega washing machine with good wash-by-hand effect. It also helps in saving washing water.
With extremely high-frequency jet nozzles, our washers achieve a strong jet based wash-by-hand effect.
During recirculation operation with jet nozzles, jet liquid is equally applied on both sides of the cloth, which also increases the knead-washing effect.
Excellent laundry starch elimination.
Less washing water consumption (comparison with FACTS). Even thick fabrics only needs to be washed once.
Can be installed in a limited space
May be added to the existing washing machine
Fully Automatic Caustic Treatment System FACTS
Polyester fabric is processed in high temperature caustic soda solution, which processes the fabric to give it a soft, draping, silky finish.
Accurate loss rates are obtained through analyzer-based automatic control, and it can be easily reproduced in each batch. Commercial caustic soda can be used as-is, and initial concentration can be prepared easily, and used caustic soda treatment can be repeatedly used.
Automatic control of loss rate eliminates the possibility of excessive loss. By getting accurate loss rates, they can be easily reproduced in each batch. Commercial caustic soda can be used as-it-is. Initial concentration can be prepared easily.
Used caustic soda treatment can be repeatedly used.
Fully Automatic Splittable Fiber Processing Machine FAMES
FAMES dissolves and removes Polyethylene terephthalate from sea-Island cotton yarn, and automatically extracts and splits the ultrafine fabric of Polypropylene.
When Polyethylene terephthalate components are fully dissolved and removed, process is automatically stopped. Therefore, ultrafine fabric obtained is not damaged at all.
It controls extracting and splitting of ultrafine fabric (microfiber) from composite fiber (sea-island cotton yarn).
Completion of the process can be easily determined by linking an analyzer and computer to the processing machine.
Treatment liquid that is collected can be reused. This helps in cost reduction.
Treatment liquid uses caustic soda only, and there is no need to use any other chemicals. Commercially available caustic soda can be used as it is.
Vacuum steam setter
It is widely used in various industries for heat treatment of textile items, wood, chemicals and other products.
It is especially used very extensively in textile industry for preventing the twisting of nylon, tetron, acetate-based, and other blended yarns, and for setting after the pleating process.
Manual FVS steam setter
When preventing twisting, , penetration of steam will be extremely uniform as a perfect vacuum is created.
Due to vacuum heat treatment, texture of yarn is excellent, which makes it very easy to weave into fabric. Moreover, even colors can be achieved when dyeing.
Semi-automatic FMS steam setter
Except loading and unloading of the yarn, the entire process is automatic. Therefore, operators are free to work on multiple tasks.
Because of automatic operation, individuals operators can't influence the consistency of the process.
Fully automatic FMSA steam setter
Because of fully automatic operation, operators are free to work on other tasks.
Because of fully automatic operation, individual operators can't influence the consistency of the process.
Hydraulically driven work prevents breakdowns that are found in motor-driven machines.
Two-way steam pipes assure that the set temperature never is exceeded.
Continuous scouring machine （BOIL OFF）
Our continuous scouring (refining) machine scours the deposits of oil, wax, sizing agent, etc. from fabric at high temperature and in a tension-less state.
A liquid flow guider is attached to the outlet of the main tank of the continuous refining machine, which is quite useful in open-widening and centering.
Dryer blowers are provided in the open-width washing machines, and drying slit are selected according to the type of fabric processed.
It is processed in tension-less and open-width state.
Heating steam drain is recirculated to the main tank of continuous scouring machine, which can help in conserving water and energy.
A liquid flow guider is attached to the outlet of the main tank of continuous scouring machine, which is quite useful in open-widening and centering.
A unique method has been implemented for scum removal from the supernatant liquid continuous scouring machine main tank.
A dryer blower is provided in open-width washing machine (S, M, W), and drying slits are selected according to the type of fabric processed.